Industrial Managed
Ethernet Switch
User Manual
錯誤
!
使用
[
常用
]
索
引標籤將
Heading
1,Product Manual
套用到您想要在此處
顯示的文字。
Page
111
of
191
2.14.1.1 Port Security Settings
Figure 2.123 displays the Port Security Setting webpage where the users can enable or disable static security on
one or multiple ports
.
To enable or disable multiple ports at the same time please hold the
Ctrl
key and select
multiple ports under the
Port
list and choose
Enable
or
Disable
and then click
Update
button
.
The lower part of
the Port Security Setting webpage shows the current status of security setting for each port on the managed switch
.
Figure 2.123 Port Security Setting Webpage
2.14.1.2 Port Security Add Static MAC
The
Add Static
(white list)
MAC
webpage is depicted in Figure 2.124
The users can create a list of MAC address
that will be allowed to access the managed switch
.
The users will need to specify the VLAN ID (VLAN) and port
number for each particular MAC address added to this list. After entering all required fields, please click on the
Add
button to add the new MAC address into the white list. Please remember that the same MAC address cannot be
assigned to two different ports. This will cause an error message
.
Note that if there are existing MAC address on
the list and the users would like to remove them, please click on the
Remove
button at the end of each record
.
Table 2.43 summarizes the descriptions of the fields in Add Static MAC webpage.