Industrial Managed
Ethernet Switch
User Manual
Configuring
with a Web
Browser
Page
38
of
49
active while another section will be grey out. For example, when
SNMP Agetn Version
is set to
SNMP v1/v2c
,
SNMP
v1/v2c Agent Setting
and
SNMP v1/v2c Trap Setting
will be available to configure as shown in Figure 2.44.
Figure 2.44 SNMP Feature
To select the
SNMP Agent Version
, the user can click on the gear icon next to the
SNMP Mode Setting
to bring up
the pop-up window as shown in Figure 2.45. When the
SNMP v1/v2c
is selected, the
Community String
and
Privilege
of each Community String can be managed as shown in the figure. After you finished, clicking on the
Save Changes
button to save any changes or clicking on the
Save Changes and Apply
button to save and apply the setting.
Figure 2.45 SNMP Agent Mode and SNMP v1/v2c Community Management
While
SNMP Agent Version
is set as
SNMP v1/v2c
, the
SNMP v1/v2c Trap Setting
section is active. The user can
configure
Trap Server
by clicking on the gear icon next to the
SNMP v1/v2c Trap Setting
. A pop-up window as shown
in can be used to manage the trap server by adding Trap Server IP and Community, and selectinv of Trap Version.
After filled in and selecting all fields, the user can click
Add
button to add an entry into SNMP v1/v2c Community
table shown in the lower part of the pop-up window. The user can also delete an entry from the SNMP v1/v2
Community table by selecting an entry and then clicking on the
Remove
button.
