Industrial Managed
Ethernet Switch
User Manual
Configuring
with a Web
Browser
Page
31
of
49
diverging points, multicast packets will be copied and forwarded. This method helps reducing high traffic
volumes due to large number of destinations, using network bandwidth efficiently.
-
Broadcast
: Messages are sent to all devices in the network.
Figure 2.33 Storm Control Feature
To configure the
Storm Control
feature, the user can click on the gear icon to bring up a pop-up window as shown in
Figure 2.34. On this window, the user can set the
Threshold
value from 0 to 25500 pps. The users can enable or
disable setting of any Storm Control Type on all ports at the same time by clicking on the box in front of the
All
line.
The storm control setting can also be independently control on each port by selecting Enabled or Disabled from the
drop-down selection under each column. After you finished, clicking on the
Save Changes
button to save any changes
or clicking on the
Save Changes and Apply
button to save and apply the setting.
Figure 2.34 Storm Control Setting Pop-up Window
