User manual Version 1.0
ABLELink
®
GPRS Serial Server SG6001
Copyright © 2004 Atop Technologies, Inc.
If you receive
+CPIN: READY
Æ
The SIM card does not need the PIN Code.
If you receive
+CPIN: SIM PIN
Æ
You need to enter the SIM card PIN code.
If you receive
+CME ERROR: “SIM not inserted”
Æ
Please check if the SIM card is properly inserted.
If you receive
+CPIN: SIM PUK
Æ
The SIM card has been locked because of the SIM card PIN code setting error.
Please contact the Telecom Operator to get the PUK code, and then use the mobile
phone to unlock the SIM card.
2.3 Device Attachment
SG6001 allows connecting
ONE
device via either serial port with DB9 connector or serial port with
terminal block. It offers RS-232/422/485 interfaces; you need to use the DIP switch to adjust according to
your device interface. Refer to the following table or the table beside the switch for detail.
SW1 (Switch 1)
SW2 (Switch 2)
Mode
OFF RS-232
OFF
ON Console
OFF RS-485
ON
ON RS-422
2.4 Power Supply Installation
a. SG6001 offers two methods to connect to power supply; however, you may only
use either the
1st
or
2nd
method to connect power supply.
1st.
You may use the power adaptor contained in the package, connecting the jack
marked
DC- IN
.
All rights reserved. Designed in Taiwan.
13 / 71
