Quick Start Guide Version 1.3
GW51C-MAXI Serial Server
1
This document is intended to provide customers with brief descriptions on the product and to assist customers to get
started. For detail information and operations of the product, please refer to the user’s manual in the product CD.
1. Packaging
Atop Wireless Serial Server x 1
5 pins Terminal Block for Serial Connector x 1
3 pins Terminal Block for Power Connector x 1
Mini DIN to DB-9 Cable x 1
Wall mount kits x 2
Atop Wireless Serial Server quick start guide x 1
Product CD containing configuration utility x 1
Product Warranty card x 1
Optional Accessories
：
Power Adapter with Terminal block output 12V1.25A
(1) US315-12 (US) Switching adapter
(2) US315-12 (EU) Switching adapter
UL Notice for Power supplier
All the series of GW products are intended to be supplied by a Listed Power Unit marked with “LPS”, “Limited Power
Source” or “Class 2” and output rate 9~30VDC, 0.3A minimum. Or, use the recommended power supply in “Optional
Accessories”.
2. Hardware
Description
2.1. Interfaces
Fig.1 shows the interfaces of Serial Server’s Connectors
、
LEDs & the factory switch settings.
Mode Switch
Table
LED
Indicator
Mode Switch
Serial Port
Terminal Block
Connector
Power Supply Input
Connector
Mini-Din Pin
Assignment
UTP
Connector
Serial Port Mini DIN
Connector
Fig 1. Front Plate of GW51C-MAXI Serial Server
Note:
One can press the reset button for 3 second to reset the settings to default value
2.2. LED
Indications
2.2.1. LAN LED Message
Message
Description
LED Off
No data is transmitting on Ethernet
LED blinking
Data is transmitting on Ethernet
2.2.2. COM Port LED Message
Message
Description
LED off
No data is transmitting on COM port
LED on blinking state
Data is transmitting on COM port
2.2.3. RUN LED Message
Message
Description
