46
Picture 55 - Self Test in progress
In case the test will fail, the message “
<*** TEST FAILED ***>
” will be displ
ayed, whereas if the test reaches in the
right way its end, the screen with the test results will be displayed (use the
“arrow up”
and
“arrow down”
keys in
order to see all the test results).
Press repeatedly the “
ESC
” key until you go back to the main
screen.
3.4.6
Communication of the system
Check on the display that inside the symbol of the house appear two arrows with alternate directions (Picture 56).
Picture 56
–
Check of the active communication with Aton portal
In case these arrows are not displayed, contact the technical support.
