Do not use the lamp in the event of visible damage to either of the two power connectors.
After each use, especially in salt water, rinse the lamp thoroughly with fresh water and then dry.
Take special care to remove any small mechanical impurities and then to lubricate the O-rings
and the surfaces on which they move. Use the supplied grease for lubrication provided with the
lamp.
Specifications: HTS SILICONE GRAY (NSF-H1),
https://www.spanjaard.biz/
In case of prolonged storage, we recommend checking the battery every 3 months and
recharging if necessary. Do not store the discharged lamp, as the battery capacity will be lost.
Store the lamp only in a dry indoor environment where it will not be exposed to sunlight, high
dust or moisture. Recommended storage temperature is 15-18 ° C.
8. TECHNICAL SPECIFICATIONS
Light output max 1830 Lumen
Constant current output - maintains constant light output
Utilises Cree XHP-50.2 cool white LED, with a lifespan of 50,000 hours
Color temperature 6500°K
Focus beam 10° or 28° (photo / video) optional
Control by Aton PRESS system, power steps 20% / 50% / 100%
Integrated Li-ion rechargeable battery pack 19.2 Wh or 25.5 Wh optional
Input voltage: max. 4.2 V
Input current: max. 2A
Overcharging and discharging battery protection, short circuit protection
Intelligent thermal control to avoid overheating
Battery status indication by color LED
Running time :
A. for battery 19,2 Wh 75 min. / 170 min. / 410 min. 100% / 50% / 20%
B. for battery 25.5 Wh 95 min. / 205 min. / 495 min. 100% / 50% / 20%
Borosilicate glass th. 5mm
Dimensions: length 159 mm x dia 48 mm
Weight: 334 g (109 g under water)
Material: hard anodized high grade aluminum alloy
Max. depth underwater - 200 m.
9. BATTERY, ITS LIFE AND POSSIBLE REPLACEMENT
The lamp contains a branded Li-ion battery-pack with protective electronics. Normal battery life reaches
up to 800 charge cycles, provided proper handling, storage and maintenance conditions are observed.
As the number of charge cycles increases, the battery capacity decreases as a result of normal wear and
tear. The battery can be replaced by a new one during warranty and post-warranty service.