13
Operating the handset
Gigaset SL560 / Aton CL303 / SWZ PTT EN / A31008-M1710-F151-1-7619 / telefony.fm / 10.7.06
The following is displayed in place of the
number:
u
External
, if no number is transmitted.
u
Withheld
, if the caller has withheld
Calling Line Identification (page 16).
u
Unavailable
, if the caller has not
arranged Calling Line Identification.
Handsfree operation
In handsfree mode, instead of holding the
handset to your ear you can put it down
e.g. on the table in front of you to allow
others to participate in the call.
Activating/deactivating handsfree
Activating while dialling
~ d
Enter the number and press
the handsfree key.
¤
You should inform your caller before
you use the handsfree function so that
they know someone else is listening.
Switching between earpiece and
handsfree mode
d
Press the handsfree key.
During a call switch handsfree on or off.
If you wish to place the handset in the
charging cradle during a call:
¤
Press and hold the handsfree key
d
while placing the handset in the base
station. If handsfree key
d
does not
light up, press the key again.
For how to adjust the volume, see
Muting
You can deactivate the microphone in
your handset during an external call.
The other party hears a wait melody.
u
Press the control key on the
left to mute the handset.
”
Press the display key to reacti-
vate the microphone.
You can switch the wait melody on and off
Operating the handset
Activating/deactivating the handset
a
In idle status, press and
hold
the end call key (confirmation
tone).
Activating/deactivating the keypad
lock
#
Press and
hold
the hash key.
You will hear the confirmation beep. The
icon
Ø
appears in the display when the
keypad lock is activated.
The keypad lock is deactivated automati-
cally if someone calls you. It is re-activated
when the call is finished.
If the auto key lock is activated, you will
only be able to dial the emergency num-
bers, see page 39.
