40
Handset settings
Gigaset SL560 / Aton CL303 / SWZ PTT EN / A31008-M1710-F151-1-7619 / registr_sett.fm / 10.7.06
Setting display illumination
Depending on whether the handset is in
the charging cradle or not, you can acti-
vate or deactivate the display illumination.
If the charging cradle is switched on, the
display is permanently dimmed.
w
¢
Ð
¢
Display
¢
Backlight
The current setting is displayed.
¤
Change multiple line input:
In Charger
Select
On
or
Off
.
without Charger
Select
On
or
Off
.
§Save§
Press the display key.
a
Press and
hold
(idle status).
Activating/deactivating
auto answer
If you have activated this function, when
you get a call you can simply lift the hand-
set out of the charging cradle without hav-
ing to press the talk key
c
.
w
¢
Ð
¢
Handset
Auto Answer
Select and press
§OK§
(
= on).
a
Press
and
hold
(idle status).
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree speaking to five different levels
and the earpiece volume to three different
levels. You can only make these adjust-
ments during an external call.
The handsfree volume can only be
adjusted when this function is set.
You are conducting an external call.
t
Press the control key.
r
Select
volume.
§Save§
Press display key if necessary
to save the setting perma-
nently.
If
t
is assigned a different function,
e.g. when toggling (page 16):
§Options§
Open menu.
Volume
Select and press
§OK§
.
Configure setting (see above).
Changing ringtones
u
Volume:
You can choose between five volumes
(1–5; e.g. volume 2 =
ˆ
) and
the "Crescendo" ring (6; volume
increases with each ring =
‰
).
u
Ringtones:
You can select different ringtones,
melodies or any sound from My stuff
You can configure the following functions
with different ringtones:
u
Ext. Calls
: for external calls
u
Internal Calls
: for internal calls
u
Appointments
: for set appointments
u
All
: the same for all functions
Settings for individual functions
Set the volume and melody depending on
the type of signalling required. With exter-
nal calls, you can also set the phone so
that it announces the name of the caller
after the first ring. However, the relevant
voice pattern must have been previously
recorded (page 22).
w
¢
Ð
¢
Audio Settings
¢
Ringer Settings
q
Select setting, e.g.
Ext. Calls
and press
§OK§
.
r
Set volume (1–6).
Note:
When set to
On
the handset's standby time is
reduced considerably.
‰
