18
Basic
Functions
Receiving a Call
When a call is received, the phone rings and the display shows "
". If the incoming call can be identified (i.e. caller's information is
transmitted from the network on which the call was made and the caller
doesn't hide it) you will also see the caller's number in the display.
, by pressing the
key or the
key. Or if the
handset is on the base and you have activated the "
" function
(See page 39 for details), simply pick it up to answer the call, you don't
need to press any key. During the conversation, the display shows the
elapsed time.
To end the call, either press the
key or replace the handset on the base.
Incoming
Call
ACCEPT
Auto Answer
Answer the call
The caller's identification can work only if your telephone network supports the service
as well as the caller's one. However the caller can still hide his/her number.
Note
Adjusting Voice Volume
During a conversation, press the
or
key to adjust the level of the
earpiece volume (or the handsfree speakerphone one, if activated). You can
adjust the volume in five levels which are showed by the bars of the icon
.
The more bars filled blue, the louder the volume. When the last bar is filled
red, this means the voice volume reach the maximal level.
Up
Down
Muting a Call
During a conversation, you can temporarily mute the microphone so that the
party on the other end of the line cannot hear you. During the period you
can still hear him/her. This mode allows you to have a conversation with
someone near you and avoid that the party at the phone is hearing what
you are saying.
, just press the
key during the conversation:
the icon
will appear on the display.
, just press again the
key: the icon
will
disappear and you will restore the normal condition.
To mute you microphone
To unmute the microphone
Right
Right
