17. Push the
“PITCH”
knob/button and turn the desired step knob one detent position and the
display will show the actual pitch assigned to that step. To edit the pitch of that step turn the
knob more than one detent position and the display will show the pitch change.
18. Change the sound parameters turning the other knobs of the synthesizer section.
19. To edit the step repetitions, push the
“REPEAT”
knob/button then turn the step knob (of the
desired step 1-8 or 9-16) one detent position, the display will show the actual step number of
repetitions. To edit it, turn the knob more than one detent position, the display will show the
repetitions change for that step.
20. To edit the gate time of each step, push the
“GATE”
knob/button, then turn the step knob (of
the desired step 1-8 or 9-16) one detent position, the display will show the actual gate time of
that step (1 to 100, TIE, SLIDE). To edit it, turn the knob more than one detent position, the
display will show the change in gate time for that step.
Sequencer Settings change.
1.
Tempo.
Push the “SETTINGS” knob/button once. Turn the step knob “1” one detent position,
the display will show the actual Tempo in BPM, to edit the Tempo, turn the knob “1” more than
one detent position, the display will show the tempo change in BPM.
2.
Gate Offset.
Push the “SETTINGS” knob/button once. Turn the step knob “2” one detent
position, the display will show the Gate offset, it affects all the steps of the pattern, to edit the
gate offset, turn the knob “2” more than one detent position, the display will show the gate
offset change.
3.
First Step.
Push the “SETTINGS” knob/button once. Turn the step knob “3” one detent
position, the display will show the First step of the pattern, to edit it turn the knob “3” more
than one detent position, the display will show the change (note: if the first step is a bigger
number than the last step, the sequence will be played in reverse)
4.
Last Step.
Push the “SETTINGS” knob/button once. Turn the step knob “4” one detent
position, the display will show the Last step of the pattern, to edit it turn the knob “4” more than
one detent position, the display will show the change.
5.
Sync.
Push the “SETTINGS” knob/button once. Turn the step knob “5” one detent position, the
display will show the actual Sync source (it can be set to internal clock, external clock or midi
clock) To edit it, turn the knob “5” more than one detent position, the display will show the
change, then push the button “7 / OK” to confirm. To cancel, just turn any other step knob.
6.
Save.
Push the “SETTINGS” knob/button once. Turn the step knob “6” one detent position, the
display will show the actual slot number, in which the actual pattern will be saved. To change
the slot number to save the actual pattern, turn the knob “6” more than one detent position, the
display will show the change in the slot number, then push the button “7 / OK” to confirm. To
cancel, just turn any other step knob.
Summary of Contents for Mochika X4
Page 1: ......
