Safety Instruction
Please conserve this manual as operation guidance. If you sell this product
to other user, please make sure that they also receive this user manual.
Always make sure that you are connecting to the proper voltage and the
line voltage not higher than stated on the decal or rear panel of the
fixture.
This fixture is intended to indoor use only. To prevent risk of fire or shock,
do not expose fixture to rain or moisture. Make sure there are no
flammable, explosive or corrosive materials surrounded in 5 meters while
operating.
The unit must be installed in a location with adequate ventilation, at least
5m away from adjacent surfaces. Be sure that no ventilation slots are
blocked.
Fixture may carry high heat, do not aim at objective exceeding 2 minutes.
Safe wire should be used to install machine. Bearing of safe wire should
be 3 times of the machine weight.
Always disconnect from the power source before servicing or replacing
fuse/lamp and be sure to replace with same fuse/lamp size and type. Cut
off power before moving, repairing and cleaning the machine.
To avoid electric shock, all fixtures must be connected to circuits with a
suitable ground.
Always secure fixture using a safety chain and carrying handles. Never
carry the fixture by its cord.
For your safe
，
please read this user manual carefully before
operation. This machine should be operated by qualified engineer
！
