Atomic Reactor 50-112, Owner'S Manual, Page: 10 / 12

10
Floorboard Style Modelers
RETURN
SEND - L
EFFECTS
LOOP
SEND - R
MODEL REACTOR 112
Atomic Amplifiers LLC.
Orange CT.
FUSE
0101010101
!CAUTION!
RETURN
SEND - L
EFFECTS
LOOP
SEND - R
MODEL REACTOR 112
Atomic Amplifiers LLC.
Orange CT.
FUSE
0101010101
!CAUTION!
 Using two
Reactor 50
112/212s Install
blank templates
onto the DS-1
docking units.
 Replace the DS-1’s back
into the docking bays
located in the top of the
Reactors making sure that
the dock locks click into
position.
 Plug the Left and Right
outputs of your Foot
Controller style modeler
or preamp into the pair
of R eactor’s R ETU R N
inputs.
 If using outboard effects
pedals or devices with your
modeler, connect them as
normal per the
m anufacturer’s instru ctions.
 It is a good idea to
make sure the output
levels are turned
down on your
modeler.
 Turn the m odeler’s
power on.
 Turn the Reactors power switches
to the ON position (they should
light up).
 Bring up the levels on your modeler and
switch to some of your favorite presets.












