Atomic 45-6666W/F, Manual

Page: 6 / 30

6
STEP 1:
48 pcs - H4 4 X 40mm Phillips Flat Head Screw 4 pcs - P2 Left Leg panel
4 pcs - P3 Right Leg panel 4 pcs - P4 Front Leg panel 4 pcs - P5 Back Leg panel
PARTS REQUIRED:
Install one Left Leg Panel
P2
and one Right Leg panel
P3
onto the edges of one Front Leg Panel
P 4
using Screws
H4
as shown in
Figure A-1
and
Figure A-2.
Install one Back Leg panel
P5
onto the edges of one Left Leg Panel
P2
and one Right Leg panel
P3
using Screws
H4
as shown in Figure B .
TIGHTEN, BUT DO NOT STRIP OUT SCREWS.
Repeat procedure for the other 3 legs.
IMPORTANT NOTE: INSTALL P2 LEFT, P3 RIGHT, P4 FRONT
AND P5 BACK LEG PANELS WITH ALL ARROWS POINTING
SAME DIRECTION AS SHOWN.
Helpful Hint: Each leg (of 4 pcs) is packed separately in 4 cartons.
Figure A-1 Figure A-2 Figure B
P3
Raw wood up Raw wood up Raw wood up
P2
Mitered edge
H4
H4
P4
P4
Arrows Pointing
on this side
Arrows must be
as per diagram.
Arrow Pointing
on this side
P2
P3
P5
P4
P3
P2
Helpful Hint: place partial leg assembly
open side up and install P5 by shooting
Screws H4 straight down.