2
Instruction Manual Kira K18
Dear Customer,
Thank you for purchasing this Atomic Kira K18 active subwoofer. With decades of experience in design and
production, Atomic is one of the leading manufacturers of professional audio equipment.
This unit has been designed and manufactured to the highest of standards so you can be assured you have
made a good investment.
For your safety and to ensure you make full use of all the features, please make sure you read this manual in full.
Product Description:
A very powerful active subwoofer delivering a massive 1800 watts of RMS power. The Kira K18 has a bespoke
18” driver and inbuilt 1800-watt Class D amplifier. The internal electronic crossover and a phase reverse
switch, make this a completely selfcontained subwoofer cabinet. It is ideally suited to work with the Kira K8
Cabinets, but will be very effective as part of most large PA systems.
Safety Advice:
• Read this manual in full before operating this product.
• Keep this manual in a safe place for future reference.
• Heed all warnings and instructions, both in this manual and on the product.
• Carry and transport this product with care. Dropping this product may result in serious mechanical failure.
• The manufacturer accepts no responsibility for injury or damage caused as a result of not following the
manual provided.
• Turn off this active speaker when not in use.
• This speaker is not waterproof and should not be used outside or in wet conditions.
• In the event of any liquid entering the housing, unplug immediately & contact a qualified engineer.
• Do not attempt to modify this unit.
• Always install the unit in a suitable location where no injury can occur from the speaker falling. When
mounting this subwoofer directly to the Kira K8 cabinets, always use all the supplied fixings to securely fit
the Kira K8 on top of the Kira K18 subwoofer.
• Check this unit matches the mains voltage and frequency before plugging it in to your mains socket.
• Should you experience any malfunction or damage to the mains cable, disconnect from the mains supply
immediately and consult a qualified engineer or replace the cable with a new one.
• All parts should be replaced with genuine spare parts and repairs carried out by a qualified engineer.
• Do not place near sources of heat or ignition.
• Check your AC wall socket will take the power you are applying to avoid overloading the mains supply.
• No naked flame i.e. candle should be placed on top of this appliance
Protection from Electric Shock:
• Only connect this unit to a mains socket with suitable trip and RCD protection.
• To disconnect from the mains socket, always remove by the mains plug or IEC connector. Do not attempt to
remove by pulling the mains cable.
• Disconnect the unit from the mains supply before cleaning. Cleaning should be carried out with a soft, dry cloth.
• Do not expose this unit to any liquids.
• Do not operate near exposed water or in high humidity.
Summary of Contents for Kira K18
Page 8: ...8...
