14
Erasing hard drives
The Bandura securely wipes/erases data from hard drives. After wiping, it verifies
that the data has been properly erased by scanning selected sectors (spot-checking).
To start erasing, plug the hard drive into the Target HDD channel. Disks can only be
erased when plugged in to the Target channel because the Source channel is write-
protected to ensure data security.
Access the Erase Menu by tapping the Erase button on the Main Menu:
Erase Menu
To start erasing immediately, tap Start Erasing target disk. Settings from the
previous erasing session will be used.
To adjust settings, tap Settings.
