Read the full manual before using this product
8
According to the switch position, the inverter will have one of the following modes:
•
Unit off
(middle position): The inverter is off, there is no AC output. The battery charger is off.
•
Power saver off
: the inverter is producing full power. The exact operating mode depends on
whether AC input power is connected to the inverter or not. If the AC input is connected, the
inverter will be operating in the bypass mode and the battery charger will be working.
•
Power saver auto
: the inverter is in the sleep mode and will only provide power if a load is
connected to the AC output. If there is no load connected, the inverter will continue
‘sleeping’ to
save energy. Please note that the load must exceed 25W to turn on the inverter output
– small
loads such as mobile phone chargers, LED lights etc will not be enough to exit the sleep mode.
If you want to change the active
“Power saver auto” mode to “Power saver off” and
vice versa, turn the
switch to the middle position “Unit off” first, wait until the
inverter switches off, and then switch it into the other mode.
The detailed description of these operating modes is provided below.
Power saver off, AC input is connected.
If
the AC input is connected, the inverter will be
working in the
AC mode 01
(in the top left
corner of the inverter LCD display there will be
a sign “
>> 01
”) as shown on the picture. In the
centre of the screen the input (I/P) sign will
have arrows pointing from it to Bypass and
battery icons. The display will show AC input
voltage at the bottom, as well as AC output.
Power saver off, AC input is disconnected.
If the AC input is disconnected, the inverter
will be working in the
Battery (inverter) mode
02
(in the top left corner of the inverter LCD
display there will be a sign “
>> 02
”) as shown
on the picture. In the centre of the screen
there will be an arrow pointing from the battery
to the inverter and to output (O/P). AC input
voltage will show 000V.
Power saver auto.
The inverter will be
working in the
Power saver
mode 03
(in the
top left corner of the inverter LCD display
there will be a sign “
>> 03
”) as shown on the
picture. The inverter will be ‘sleeping’ in
standby until a load (>25W) is connected to
the inverter output. The signs “OUTPUT” and
“O/P” will be flashing on the screen.
www.ato.com
18005851519
Global Shipping
