Page 17/32 (26/21)
Assembly and adjustment of the
height of the headrest
The holder for the headrest is located on
the back of the backrest in the upper area.
(Fig. 4)
Here you can also adjust the height of the
headrest.
Make sure that the clamping lever is well
secured after inserting the headrest.
Adjusting the depth of the headrest
The headrest can be adjusted in inclination
and depth to the needs of the user.
To do this, loosen the clamping lever (Fig. 5
- Pos. ) and adjust the depth and the
inclination. Use the Allen screw to adjust
the inclination of the headrest.
If necessary, the height of the headrest
must be readjusted.
Fig. 4
Fig. 5
Warning!
Make sure that ALL screws and clam-
ping levers are tightened or secured
after adjusting the headrest.
Assembly and adjustment
