P a g e
|
17
To Record an event,
a)
Press the
blue
button once while you are watching a channel.
b)
A pop-up window will display with 2 options as shown in screenshot above, it can be set to
start recording now, or based on a schedule (start & end date/time) as well as the date for
the event.
c)
After selecting the recording time, press the
OK
button.
To cancel and go back to previous page, select the “Cancel” Button and click “OK”
If the recording was set to record now, the event will start to recording and a small red icon will
display on the corner of the TV indicating that recording is in progress. To stop the recording,
simply press the “
Stop
” button or Pause Recording, press the
play/pause
button. To resume
recording press the
Play/Pause
button again.
If the recording was set on a schedule, then the recording will wait until the date & time set, and
stops when schedule end date has reached.
On both cases once the recording is complete, you can playback the recording by pressing on the
play/Pause
button, and the playback will start from the beginning.
If more than 1 recording was captured, you can skip one recording at a time by press the
Back &
Next
buttons accordingly.
Press the
R.R & F.F
to move to the First or last recording on the USB Drive
If you need to temporary stop the playback at any time, simply press the
Play/Pause
button and
the picture will pause, press the same button again to resume playback.
Note: because this feature is still under development, it is only limited to a
20 min
recording time
limit only, and it will stop as soon as this time limit is reached. Also make sure the Thumb Drive is
large enough to fit the recording.
Upon estimation, a 1 Gig Thumb Drive can record up to 15 mins of recordings
.\
Summary of Contents for XTV 131
Page 1: ...P a g e 1 USER GUIDE FOR XTV 131...
Page 6: ...P a g e 6...
