opERaTInG InSTRUCTIonS
Battery Installation
The battery (included) is a coin style 3v
Lithium (Cr2032).
Unscrew two set screws on the top side of
the unit and open the body of unit.
Install the battery into housing with the polarity
order shown at the base of unit.
Turning the Ultra Sight on
After you install a battery press Power/
mode button to turn unit on in
aUTo
BRIGHTnESS MoDE
. The mode indicator
light will glow with green. By pressing the
MODe button again you will select
MaXI-
MUM BRIGHTnESS MoDE
. The mode indi-
cator light will glow with red. By pressing
this button a third time the unit will turn off.
power/Mode Button
• Press once for: To turn unit on in
AUTO
BrIGHTneSS MODe
, indicator light will
glow with green.
• Press twice for:
MAXIMUM BrIGHT-
neSS MODe
, indicator light will glow with
red.
• Press third time: To turn Ultra sight off.
Hold the Ultra Sight away from you and
look through it with both eyes open to see
reticle pattern.
Reticle patterns
every Ultra Sight Digital Compact comes
with three reticle patterns.
• Dot
• Post
• Post with Dot
You can choose your preferred pattern
by pushing the reticle Pattern Selector
button.
MoUnTInG
The Ultra Sight Digital Compact is
designed to be mounted onto a standard
7/8 weaver rail.
Caution:
Be sure gun is not loaded. Use
safe gun handling procedures all the time.
Slightly loosen horizontal fixation screws.
Place the scope on the dovetail mount,
making sure that the mount aligns with the
receptor attachment screw. re-tighten hor-
izontal fixation screws.
aUToMaTIC BRIGHTnESS SEnSoR
Your Ultra Sight DC has a built in Automatic
Brightness Control. This control automati-
cally adjusts the brightness of the reticle to
the optimal level.
important:
it is very important that you
do not cover or block this sensor (it is
located in the front of the scope).
This sensor also will require to be cleaned
cleaning from time to time. To do this
please wipe clean gently with an optical or
soft cloth.
notE:
If you need more reticle brightness
use the
MAXIMUM BRIGHTNESS MODE
.
wInDaGE anD ELEvaTIon aDjUSTMEnTS
The vertical (elevation) and horizontal
(windage) adjustments for the Ultra Sight
Digital Compact can be achieved by turn-
ing the windage and elevation adjustment
mechanisms. Slightly loosen the locking
screw before windage/elevation adjust-
ment. rotate windage and elevation screws
as needed to correct aiming point. When
reaching the maximum of the rotation do
not use force. After adjustment was done
turn the locking screw clockwise to block the
adjustment mechanism.
MaInTaInInG yoUR ULTRa SIGHT
DIGITaL CoMpaCT
The Ultra Sight Digital Compact is water-
proof and shock-proof. However, you
should never try to take apart or clean it
internally (it will void your warranty). If your
scope ever does need repairs or adjust-
ments, it should be returned to ATn's
service department. Optical surfaces will
perform their best if they are occasionally
wiped clean with a lens cloth or with optical
quality lens paper like those for eyeglasses
or camera lenses. Maintain the metal sur-
faces of you Ultra Sight by removing any
dirt or sand with a soft brush so as to avoid
scratching the finish. Wipe down the unit
with a damp cloth and follow with a dry
cloth. Finally, going over the body with a
silicon treated cloth will restore luster and
protect the scope against corrosion, be
careful not to touch any of the lenses with
the silicon cloth.
17052011
