ATN TTWS Series, Operator'S Manual

Page: 27 / 50

2-7
be viewed through the TTWS eyepiece and the monitor at the
same time.
FIGURE 2.9. OPERATION SWITCHBOARD
The user, while looking through the TTWS eyepiece, will be able to
tell if video is being displayed on the monitor, because the VID icon
will be visible in the bottom left corner of the eyepiece.
4. To turn off the Remote Video Output, repeat step 3.
NOTE
The image seen in the TTWS sight will be smaller than its
actual resolution, due to the video processing differing from
that of a monitor.
To utilize image capture and review follow next:
1. With no menu visible press and hold the “Enter” button until a
camera icon appears on screen. (Figure 2.10.)
2. Images are captured by pressing the enter button quickly.
3. To turn off image capture press and hold the “Enter” button
until the camera icon disappears from the display. Images can be
viewed by entering “Menu 3” (Screenshot) and pressing the left
and right arrow buttons. Pressing the down button “trash can icon”
button will erase all captured images.