4-5
C. INFRAReD (IR) ILLUMINATOR OPeRATIONS
CAUTION
The IR illuminator is a light that is invisible to the unaided eye
for use during conditions of extreme darkness. Please note
that, the light from the illuminator can be detected by others
that are using night vision devices.
NOTE
The purpose of the illuminator is to view at close distance up
to 3 meters when additional illumination is needed.
Ir Illuminator gets activated when the monocular is already on by
holding button (a) pressed for 1,5-2 seconds. a red light appears in
the eyepiece to indicate that the Ir illuminator is operating.
You may focus the Ir light for additional distance by placing the
focusing lens of the Ir pivot plate (B) onto the window of the Ir illu-
minator (C). this will extend the range the useful range of the Ir.
A
b
C
FIGURe 4.4. INFRAReD (IR) ILLUMINATOR OPeRATIONS
Summary of Contents for NVM14
