3
BATTery insTAllATion
install standard AA batteries as follows:
1. Unscrew the battery cap[1].
2. Insert AA battery[2], observing the polarity as indicated.
3. replace the battery cap and screw cap hand tight.
install cr123A batteries as follows:
1. Unscrew the battery cap[1].
2. Screw the Cr123 battery adapter[3] in to the cap.
3. Insert the battery[4], observing the polarity as indicated.
4. replace the battery cap and screw cap hand tight.
operATion
take the monocular out of the case.
rotate the operation knob from “OFF” position to “On” position to turn the unit on. the pro-
tective lens cover shall be attached to the lens. Do not turn the unit on in daytime without the
protective lens cap on. You should see green glow in the eyepiece.
Observe the scene and adjust the diopter for optimal
image clarity.
You may now enter a dark environment or simply shut the
lights off in order to darken the room.
next, remove the lens cap/daylight filter. Adjust the
front lens focusing. You should not have to readjust the
diopter. remember that focusing range starts from 3 m.
to turn the unit off, rotate the operation knob from “On” to “OFF” position.
Focusing
to focus the night Spirit first you will need to adjust the diopter. Simply turn the diopter clock-
wise until it stops. then, while looking through the diopter at an object, slowly turn the diopter
back counter clockwise until the grain on the image becomes sharp.
NOTE:
We suggest that you focus the diopter during daylight with the filter on.
next focus the front lens until the image and the grain become both sharp. When you are in
low-light conditions and the daylight filter is off, you may focus the front lens to receive sharp
image, the diopter should not be adjusted.
NOTE:
The front lens should be readjusted as you view objects at different distances.
1
4
3
1
2
OperAtIOn KnOB
