7
UNIVERSAL HELMET MOUNT
(OPTIONAL)
Attachment of ATN Night
Spirit MP to a range of bal-
listic helmets. The Helmet
mount fits securely onto
helmet via a rugged strap-
ping device and grooved
hooks. With helmet mount,
the Night Spirit MP can be
positioned directly in front
of user’s eyes or flipped up
out of viewing position.
1. Loosen the nut (C). At-
tach the adapter (A) to
the rail (B) of ATN Night
Spirit MP. Tighten the
nut (C) anew.
2. Tighten and fixate the
straps (D).
3. Align the adapter and the head. Slide
the monocular rearwards until the
alignment boss (H) aligns with the
alignment groove (F) on the head/hel-
met mount. Push until the monocular
locks into the helmet mount.
4. Place the helmet mount with Night
Spirit MP onto a head.
5. Slide button (I) and move the unit along
the rail for eye relief adjustment.
6. The Night Spirit MP helmet mount has
a flip-up mechanism. Push the button
(E) on the side of mount and lift the unit up until the unit reaches in the top position.
7. Push the same button (E) to lower Night Spirit MP to the viewing position. Turn the device on
for continuation of the operation.
8. The Night Spirit MP can be placed before the right or left eye. In order to re-adjust the mon-
ocular for use with another eye, take the unit off the adapter, turn the unit to other side (for
180
º
) and mount it on the headset through the rail on this side. Push the button (J) and move
the device along the slide-rail (I) for comfortable position.
WEAPON MOUNT
(OPTIONAL)
NOTE
The ATN Night Spirit MP is not a weapon sight,
however, it can be used in conjunction with a col-
limated dot sight or laser aiming device.
To mount the Night Spirit MP perform the following:
1. Loosen the clamping knob on the weapon mount.
Position the monocular mount onto the weapon’s
mounting rail, adjust the fore/aft position of the mon-
ocular as necessary by loosening the clamping knob
and repositioning the weapon mount on the rail.
Tighten by turning the clamping knob.
D
D
F
G
E
H
I
J
A
B
C
