background image

2

specificATions

Magnification .......................... 1X (optional 3X, 5X)
Lens System ............................ 24 mm; F1:1.2
Field of view ............................. 40°
Range of Focus ....................... 0.25m to 

Power Supply .......................... 1.5V AA battery or 3V CR123A Lithium battery
Battery Life (AA type) ............. 30 hours (15 hours w/IR illuminator)- Gen.2+; 

                                                            25 hours (12 hours w/IR illuminator)- Gen.3 and Gen. 4
Battery Life (CR123A type) .... 60 hours (20 hours w/IR illuminator)- Gen.2+; 

                                                            50 hours (17 hours w/IR illuminator)- Gen.3 and Gen. 4
Operating Temperature .......... -40°C to +50°C
Storage Temperature .............. -50°C to +70°C
Waterproof ............................... 20 m for 1 hour
Dimensions ............................. 151x80x55 mm (6.7” x 2.5” x 4”)
Weight ..................................... 0.32kg (0.7 lb)

ApplicATion

The PS-14 Multi-Use Night Vision monocular is one of the most versatile night vision devices 

available. This unit can be handheld, head- or helmet mounted for hands free usage, it is 

camera/cam-corder adaptable, and can be transformed into a 4x or 6.5x bioculars. This unit 

can also be weapon-mounted. Built-in IR illuminator enhances the ability of the user to read 

maps and operate in confined, zero light areas. The PS14 is available with several image inten-

sifier options to meet a wide array of specification requirements.
The  PS-14 night vision monocular is a complex opticoelectronic system for individual use. The 

device consists of the objective lens assembly, eyepiece and the body. The body contains an 

image intensifier tube assembly with an integrated high voltage power source and the battery 

housing. 
Objective lens protective cover is intended to protect the objective lens from dust and 

scratches. It also acts as a daylight filter, allowing you to test the scope in daylight or other 

bright light situations. The pinhole in the center of the protective cover allows the user to check 

the operation ability of the device in daylight conditions.

NOTE: 

Do not test the scope in daylight conditions even with the daylight filter/lens cap on for 

more than ten (10) minutes.

•  High Quality  light intensifier tube
•  Super fast lens system provides the user 

with a clear and sharp image
•  Built-in Infra-Red illuminator lets you see 

even in total darkness
•  Interchangeable lenses for different mag-

nification
•  Adjustable Flip-up head mount for hands 

free use
•  Automatic brightness control for high-light 

protection

•  IR-on and Low Battery indicators
•  Rugged and versatile design
•  Single switch knob operation
•  Camera/camcorder-adaptable
•  Helmet-mountable
•  Weapon-mountable
•  Flexible carrying case 
•  Uses one AA battery 
•  Waterproof 20 meters for 1 hour

feATres

* ATN reserves the right to change the above specifications at any time without notice 

Summary of Contents for ATN PS-14













Reviews: