3
operATing
mounTing
1. Slightly loosen the fixing screws on the 7/8” weaver rail built into the scope.
2. Place the scope on the dovetail mount of the fire arm making certain that the mount aligns
with the receptor attachment screw groove. Adjust as necessary.
3. tighten the fixing screws.
NOTE:
Receptor attachment screws may need to be tightened after continuous shooting.
mounTing sysTem
the AtN Night vision riflescopes mounting System allows to change the position of the rif-
lescope flexibly on the weapon in relation to a shooter in combination with the fixed positions
already available on the weaver rail. For this purpose in the base of the mounting bracket
there is a rail with a fixing projection. there are three grooves in the mounting bracket for
mounting this rail. Besides it is possible to change the position of the riflescope additionally
by 1/3 of inch. For doing this one needs to about-face the rail.
to change the position of the riflescope on
the weaver rail additionally follow the steps
mentioned below:
1. Unscrew the two screws, which attach the
rail to the mounting bracket.
2. take the rail out of the groove.
3. About-face the rail in case of necessity.
4. Place the rail into another groove.
5. Fix the rail with the two screws.
NOTE:
If the rail is not taken out easily, screw up tight one of screws into the threaded aper-
ture in the middle of a fixing projection of the rail. Continue rotation of the screw. Thus the
screw will push out a rail from a groove.
brighTness AdjusTmenT
By rotating the “r” handle you may adjust the reticle’s bright-
ness. Adjustment could be easily seen if you look trought the
scope while adjustement.
windAge And eleVATion
the vertical and horizontal adjustments for the Aries
can be achieved by turning the elevation and windage
adjustment mechanisms (remove dust caps first). each
click equals to 1/4 inches at 100 yards. When reaching
the maximum of rotation do not use force.
reticle Brightness Adjustment
Windage
elevation
Weaver
rail
Grooves
rail with a fixing
projection
Screws
