2
ApplicAtioN
The
Aries 330 “Warrior”
is an affordable, high quality 1
st
Generation weapon sight. It
sports features such as a new super fast front lens system for optimal brightness, easy
one-button operation and a reticle brightness adjustment. The Warrior also comes with
our new detachable, most powerful in the industry 450mW Infra-red Illuminator with dedi-
cated windage and elevation adjustments. This new IR lets you see even in total darkness
up to 150 yards away!
Combine this accuracy with other features such as a new super fast front lens system
for optimal brightness, easy one-button operation, reticle brightness adjustment and our
new detachable, most powerful in the industry 450mW Infrared Illuminator with dedicated
windage and elevation adjustments.
PreParation for oPeration
Before getting started make sure to follow
these steps:
• Install the battery into its housing with the
polarity order shown on the main body
of the unit.
• Switch on the Aries scope with the
protective lens cover still attached to the
lens.
• Make sure that the green luminance of the light intensifier tube is present.
• Observe the scene, and adjust the diopter and/or lens for optimal image clarity.
• You may now enter a dark environment or simply shut the lights off in order to darken
the room.
• Next, remove the lens cap/daylight filter.
• Observe the scene, and adjust the front lens for ideal focus.
• Finally, you may need to turn the infra-red (IR) illuminator on. Notice the ability of the
Aries scope to see in total darkness with help of IR illuminator.
opeRAtiNg
Mounting
1. Slightly loosen the horizontal and vertical fixing
screws on the 7/8” weaver rail built into the
scope.
2. Place the scope on the dovetail mount of the fire
arm making sure that the mount aligns with the
receptor attachment screw groove. Adjust as
necessary.
3. Tighten the horizontal fixing screws.
NOTE:
Receptor attachment screws may need to be tightened after continuous shooting.
Battery
installation
Fixing
screw
