INSTALLATION INFORMATION
© Copyright 2022 ATMOX INC
Issue: 2022-01
ATMOX INC
10612-D Providence Rd. #229, Charlotte, NC 28277
Phone: 704-248-2858
www.atmox.com
Tools needed for Installation:
•
Drill with screw bit to fit screws selected
•
Screws for mounting to joist (not included)
Installation Steps:
Take U-Bracket, extension shaft (pipe) and 4 locknuts.
Screw 1 locknut on each end of shaft.
Insert shaft into U-Bracket and attach by tightening with lock nut.
Attach other end of shaft into opening in fan bracket and tighten with lock nut.
The bracket is now ready to be mounted directly to the joist in the crawlspace or attic.
Use 2 or 4 screws to attach U-Bracket to both sides of the joist through the 4 available openings.
Make the bracket tight to avoid fan vibration.
Fan is ready for power connection.
1
2
3
4
5
6
7
2
3
4
6
Fan Connector Wire with Quick Splice Connectors
(Included)
Reference the Installation Guide for Controllers or Component Wiring
Instructions for low voltage wiring instructions. Jack plugs directly into fan.
POWER OPTIONS
12V AC Adapter
(Sold separately – Item: 01-175-032)
For use with one electrical outlet for each fan. Outlet must be within 6 feet of
fan location. Fan will run continuously unless triggered by some type of
control. Jack plugs directly into fan.
