Timer remote operations:
This haze machine has a warm up time of approximately 4 minutes. Once the machine has
warmed up, please follow the instructions below.
The timer remote allows the machine to be run from three different options;
Timer fogging option
To use this option, press the
“TIMER”
button so the Yellow LED is illuminated.
You can now use the
“INTERVAL”
,
“DURATION”
and
“OUTPUT”
controls to set the times,
length and amount of each fog burst.
To turn this option off, simply press the
“TIMER”
button again so the Yellow LED goes out.
Continuous fogging option
To use this option, press the
“CONTINUOUS”
button so the Red LED is illuminated.
You can now adjust the amount of fog output by using the
“OUTPUT”
control.
To turn this option off, simply press the
“CONTINUOUS
” button so the Red LED goes out.
Manual fogging option
To use this option, simply press and hold the
“MANUAL”
fogging button until the desired
amount of haze is emitted. Please note that this option will only function once the Green LED
is illuminated.
STARTING OPERATION
The fluid tank of the unit needs to be filled with haze fluid before switching on.
Always disconnect it from the mains supply as fluid could be spilled.
Only use quality haze fluids recommended by your dealer. We recommend high quality
haze fluids. You must not use substances which are classified as
“DANGEROUS WORKING MATERIALS”
or
“FLAMMABLE FLUIDS”.
If fluid should get inside the main housing, disconnect the unit from the mains immediately and
consult a technician.
OPERATION
Switch the unit ON via the power switch. Connect the remote control to the control input socket.
After the units warm up time the Green LED on the remote will light up, the unit is now ready for
operation.
O P E R AT I O N
Summary of Contents for Lunar FOG08
Page 1: ...Order code FOG08...