V E H I C L E S - Q U I C K S T A R T G U I D E
Place the machine on the passenger floor or the middle of the backseat with the output
nozzle facing the front of the vehicle. Ensure all windows and doors are closed and turn on
the vehicle’s air recirculation.
Ensure the fog output percent is set to 50%, press the enter button, and gently shut the car
door. Allow the machine to run continuously for 10 minutes.
Remove the container from the machine and fill with Atmosclean Sanitizing Solution™.
Replace the container and secure the fluid hose using the quick connect.
Connect the machine to the proper rated power supply outside of the vehicle, use an
extension cord if necessary. Turn the switch on the back of the machine to “on”. Allow up to
10 minutes for the machine to preheat. The screen will notate when the machine is ready.
After 10 minutes, disconnect the power cord from the outlet. Allow the vapor to settle for 15
minutes. After 15 minutes, open the doors to evacutate the remaining vapor. Avoid direct
inhilation of any remaining vapor.
Congratulations! Your vehicle is officially Atmosclean!™
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Please take precautions when using Atmosclean Sanitizing Systems. For safety instructions, please refer to page 3.
If your OLED Display reads “UH OH, EMPTY FLUID TANK!”, please follow the steps on page 4. Before proceeding with
the following steps, ensure no person or pet is in the vehicle. During the process, vapor may seep out of the vehicle.
For your safety we recommend wearing personal protective equipment and performing the following steps outdoors
or in a well ventilated area.
5
