9
4.4 Light modules and controls
4.0 Operation
Hook for headlight
When the headlight is taken off the hook, it switches on automatically. The
same way, when you hang it up again it switches off.
LED headlight
LED light source
Light modules
Control panel
Display of level of
brightness resp. of
time when switching
on the disinfectant
timer
Adjustment of
brightness resp.
disinfectant timer
Activation
disinfectant times
Display light
module
Manual activation /
deactivation of light
ports
• After switching on, the light module is displayed amongst the corresponding light port (LED or no display [no display: no
light module integrated / intended]). The kind of display depends on the presetting from installing resp. your purchased
options.
• Activate light module by taking the cable out of the light port resp. take off the headlight.
• In the case that more than one light guide is taken out, the last removed one will be activated. As soon as this light
guide is put back, the light source of the other light guide is switched on again. When two light guides are taken out and
it should be impeded that the unused channel is activated, it can be switched off manually immediately after removal.
• Adjustment of brightness:
Choose port, press the up/down button on the right side (possible: from 100 % until 10 %). When switching off the
device the last adjustment will be kept.