![Atmos S 61 Corian Series Operating Instructions Manual Download Page 23](http://html.mh-extra.com/html/atmos/s-61-corian-series/s-61-corian-series_operating-instructions-manual_3003718023.webp)
23
Troubleshooting
7 Troubleshooting
The product has been subjected to a thorough quality control in the factory. If a fault
should occur despite this care, you may be able to resolve it yourself.
ATMOS® LED Light Cube CORIAN®
Error symptom
Possible cause
Remedy
No light
Device is not switched
on.
1. Switch on the device.
Defective power cable.
1. Observe the ATMOS® S 61
Servant ENT workstation
operating instructions.
Defective fuse.
Insufficient light.
Fibre optic light cable
adapter not attached
correctly.
1.
Check whether the fibre optic
light cable adapter is fitted
properly.
Fibre optic light cable
adapter not suitable for
fibre optic light cable.
1.
Use a fibre optic light cable
adapter that is suitable for the
fibre optic light cable.
Fibre optic light cable
defective.
1.
Change the fibre optic light cable.
Light too bright/
dim.
Brightness not adapted.
1. Adjust the brightness.
Servo-Drive®
Observe the corresponding operating instructions.