Atmos S 042 NPWT Operating Instructions Manual Download Page 24 | Manualshive

Page: 24 / 40

Atmos S 042 NPWT Operating Instructions Manual Download Page 24

24

4.2.7 Battery service life exceeded

If the average lifetime of the battery is reached, this message

will be displayed with every new start of the vacuum unit.
This warning message can be closed by touching the key

and only appears again when the negative pressure unit is

restarted.
In order to avoid operational failure of the negative pressure

unit have the battery replaced by the manufacturer as soon as

possible.

4.2.8 Automatic switching off

If a power supply unit has not been connected, in spite of

repeated "Battery discharged" warning messages, the negative

pressure unit switches itself off automatically after 30 minutes.

The negative pressure unit can only be switched on again

once a power supply unit has been connected, thereby re-

charging the battery.

4.2.9 Period tests

A period test is required every two years. This will be displayed

on the vacuum unit.
This warning message can be closed by touching the key

and only appears again when the negative pressure unit is

restarted.

«
...
22
23
24
25
26
...
»

Summary of Contents for S 042 NPWT









































Reviews:

No comments