2. Basic Operation
2.1. Turing On/Off
Turing On:
Hold Button D (bottom-left) for 3 sec.
Turing Off:
Hold Button D (bottom-left) for 3 sec in watch
mode.
2.2. Charging
Please make sure the charging point are dry and clean.
It requires 2 hours to fully charge the MISSION ONE.
(Power input : DC 5V/2A)
2.3. Buttons
2.4. Diving Safety
● Pleaser read this manual thoroughly and make
sure you understand the operation, display,
limitation of the MISSION ONE.
● All dive gears will fall. It is not whether it will fall
but when it will. Firmware may have bug, too. Do
not use the MISSION ONE as your only source
of information. Have a backup computer and do
dive plan before each dive.
● Diving has risk. Only trained diver should use the
MISSION ONE. Do not use the MISSION ONE in
any dive beyond your certification level.
● MISSION ONE is designed for recreational
diving. Do not use it in commercial diving.
● It is assumed that the diver's ascent rate is
10m/min(33ft/min). Ascending significantly faster
than this will impact decompression calculation.
● Please follow the decompression stops advised
by MISSION ONE. Violation will increase the risk
of decompression sickness, which may lead to
serious injury or death.
4
