Atmos Chair 21 P Operating Instructions Manual Download Page 5

5

1.4 

Scope of supply

Prior to dispatch, this ATMOS device was subjected to an extensive functional test and has been carefully packed.

Nevertheless, please compare the contents of the shipment on completeness immediately upon receipt (see delivery note)

1.6 

Explanation of symbols

Warning, 

 especial diligent notice!

Serial number

Order number

Creation date

The CE sign shows that this 

product meets the appropriate 

requirements of the

EC Directive.

Important information!

1.0  Introduction

  Ambient conditions:

 

   Transport/Storage: 

-20...+50 °C;

   

5...90 % air humidity

   

non-condensing

   

at air pressure 700...1060 hPa

  Operation and

battery charging: 

+5...+35 °C;

   

20...80 % air humidity

   

non-condensing

   

at air pressure 700...1060 hPa

Graduierter 

Sekretbehälter (1l)

Sekretbehälter-

deckel mit 3facher 

Übersaugsicherheit

REF

SN

1.5 

Transport and storage

  The transport of the device may be effected only in a 

dispatch carton upholstered and offering suffi cient protec-

tion.

  Please document and report damages in transit imme-

diately. For complaints or return deliveries, please use 

the enclosed form 

QD 434

.

The form QD 434 can also be downloaded from the 

internet www.atmosmed.de.

  The unit must be allowed to stand for up to six hours at 

room  temperature  prior  to  starting  up  for  the  fi rst  time 

following transport at temperatures below freezing. The 

unit may 

not 

be operated if it has 

not 

acclimatised as this 

might damage its diaphragms. 

Summary of Contents for Chair 21 P

















Reviews: