3
1.2
Intended use
1.3 Function
With the doctor's chair ATMOS Chair 51 D the exami-
ner can take optimum position to the patient.
The ATMOS Chair 51 D is equipped with a mechani-
cal height adjustment. The seat height can be varied
between 56 bis 74 cm.
The ATMOS Chair 51 D is mobile on 5 castors and
equipped with a backrest which is adjustable in height
and inclination. In addition it is rotatable and can
therefore be used as elbow rest.
Name:
ATMOS
®
Chair 51 D
Main functions:
This doctor's chair enables the optimum positioning of the
doctor with regard to height and access to the patient
Med. indications/ application:
For positioning the doctor at the patient during his treatment
Specifi cation of the main function:
• Height adjustment of the seat by gas compression spring
from approx. 56 cm up to approx. 74 cm
•
360° rotation
• Lockable in every heights position
•
Backrest adjustable in height and inclination, rotatable
•
Mobile on 5 castors
Application organ:
Positioning of the patient
Application time:
Temporary (Max. 60 minutes)
Application site:
In clinics and practices for ENT doctors and phoniatrists. The
application of the doctor’s chair must be executed by medi-
cally trained persons only.
Contraindications:
•
Max. weight load 140 kg
•
May only be used as seating on horizontal surfaces
The product is:
□ active X not active
Sterility:
Not necessary
Single use product / reprocessing:
No single use product
1.0 Introduction
1.1 Notes on operating instructions
These operating instructions contain important notes on how to operate the ATMOS Chair 51 D
safely, correctly and effectively. Their reading helps to avoid risks, and also to reduce repair costs
and down-time. That increases, amongst other things, the reliability and service-life of the device.
These operating instructions serve not only for new operating personnel to be instructed in its use,
but also for use as a reference manual. Any reprint - even in extracts - only after written permission
from ATMOS.
These operating instructions must always be kept available near the device.
Care and safety inspections in conjunction with professional execution provide for operational safety
and readiness for use of your ATMOS Chair 51 D and are therefore a must besides regular cleaning.
Repair work and safety inspections may be carried out only by expert personnel authorised by
ATMOS. By applying only original spare parts you will have the guarantee that operational safety,
readiness for work and the value of your ATMOS Chair 51 D will be preserved.
●
The product ATMOS Chair 51 D bears CE marking CE 0124 according to the EC Directive of the
council for medical products 93/42/EEC and meets the basic requirements of Appendix I of this
directive.
●
The product ATMOS Chair 51
D
complies with all applicable requirements of the directive
2011/65/EC restricting the use of certain hazardous substances in electrical and electronic
equipment (“RoHS”).
●
The declaration of conformity can be obtained on our website at www.atmosmed.com.
●
The quality management system applied at ATMOS has been certifi ed according to international
standards EN ISO 9001 and EN ISO 13485.
●
Prior to start-up please peruse chapter 2.0 „For your safety“, in order to be prepared for any
possible dangerous situations.