InLine model
Assembly Instructions steps
3
Step 5
Connect the Cold water hose
to the inlet on the left side of
the unit. (Don't forget to insert
rubbers).
Be sure to use reinforced hose.
Be sure to close it well.
Step 6
Connect the Hot water hose to the
outlet. (don't forget the rubbers).
Be sure to use reinforced hose.
Be sure to close it well.
Open the water supply and check
for leakage.
If there is no leakage - Go on
If there is leakage, Find the
leakage point and fixe it.
Check again
Don't continue anless you sure
there is no leakage.