Page 1: ......
Page 2: ......
Page 3: ... electric cable before Step 5 Connect the Hot water hose to the outlet Don t forget the rubbers Be sure to use reinforced hose Be sure to close it well Open the water supply and check for leakage around the hoses If there is no leakage Go to step 6 leakage Check again Don t continue unless you sure there is no leakage Step 6 Connect the electric cable to the Terminal block Step 7 Close the cover b...
Page 4: ...r higher Fix to the wall 2 top and 1 bottom screw Step 6 Step 4 Assemble and fit the sliding shower bar to the wall including the shower hose and rose Step 3 Turn on the water to fill the heating chamber and check for leaks Connect cold water supply inlet hose Step 5 Attach the front cover round the knobs to match the correct pivot and secure by screw top and bottom For further information on inst...
