4
1. Safety Guidelines
Read this manual thoroughly before installing and using the instant water heater. Failure to comply
with the safety, installation or operating instructions will void the product warranty.
The product manufacturer and the product distributor will not be liable for any damages or injury
caused by failure to comply with the installation and operating instructions specified in this manual
or by improper use of the product. For best performance, ensure that this water heater is installed
in accordance with all electrical and plumbing codes applicable to your area, and as specified in
this guide.
This product has more than one power supply connection point. Do not attempt to install, clean,
inspect, disassemble, service or repair the water heater without first shutting off all the power to
the unit by means of the circuit breakers on the main electrical panel..
WARNING:
Failure to adhere to the safety guidelines might result in severe injury or death.
The water heater must be installed in compliance with all national, state, provincial and local
electrical and building regulations. We recommend that you consult a qualified electrician
and a qualified plumber in case you have questions about anything relating to codes for this
product.
This product is intended for household and indoor use only. Do not immerse in water.
Each breaker used to power this unit must be grounded by means of the electrical panel.
The heater must be connected directly to dedicated circuit breakers on the main electrical
panel.
Do not install the heater where it may be subjected to direct sunlight, rain, splashing water,
moisture/humidity or freezing temperatures.
This unit is intended for heating water only. Do not attempt to use the unit for heating any
other kind of liquid.
2. About Your Atmor Electric Tankless Water Heater
Congratulations on your decision to purchase one of the finest instant water heaters currently
available in the market! Your new instant water heater has advanced water flow rate and temperature
sensors that are designed to modulate power to the heating elements to maintain a user-selected
output water temperature range for 18kW/ 24kW/ 27kW: 90°F (30°C) to 122°F (50°C) (subject to
the temperature of the incoming water).
WARNING:
When setting the water temperature of the instant water heater, be sure to
consider safety and energy conservation. Prolonged skin exposure to water temperatures above
120°F (49°C) can result in severe burns or death. The maximum temperature setting on this instant
water heater is 122°F (50°C). Always take precaution to feel the water before bathing or showering,
and make sure the temperatures are not too hot. You are required to read and comply with the
following Time/Temperature Relationship chart to determine the right water temperature for your
home.
Summary of Contents for AT-910-18TP
Page 20: ...Notes P N 196183J ...