1.3.2.
Evaluation Kit Specifications
Table 1-1 Evaluation Kit Specifications
Characteristic
Specifications
Temperature
Operating
0°C to +70°C
Storage
-40°C to +85°C
Relative Humidity
0 to 90% (non-condensing)
RoHS status
Compliant
Ordering code
ATSAME70-XPLD
1.3.3.
Board Features
Table 1-2 Board Specifications
Characteristics
Specifications
PCB characteristics
83.5 × 105 × 16mm (4 layers)
Processor
ATSAME70Q21 (144-lead LQFP package) ARM Cortex-M7 Processor.
Processor clock sources 12 MHz crystal oscillator
32.768 kHz crystal oscillator (not populated)
EEPROM
One AT24MAC402 EEPROM
SDRAM
One IS42S16100E 16 Mb SDRAM
SD/MMC
One 4-bit SD card connector
USB
One Micro-AB USB device
One Micro-AB USB for EDBG debug interface
Camera interface
Camera Extension Header for connection with ISI Modules (not populated)
Ethernet
One Ethernet PHY (RMII 10/100)
Debug port
One JTAG interface connector
One ETM Trace interface connector (not populated)
Expansion connectors
Three Atmel XPRO Extension Headers
Arduino R3 compatible set of headers (not populated)
GPIO,TWI, SPI, USART, UART and Audio interfaces are accessible via these
headers
Board supply voltage
5V from USB target, from USB Debug or from Arduino shield
On-board power regulation is performed by a 3.3V LDO
User interface
Reset and free user pushbutton
One green user LED
1.3.4.
Board Overview
The Atmel SAME70-XPLD is a hardware platform to evaluate the Atmel ATSAME70Q21.
Atmel SAME70-XPLD [USER GUIDE]
Atmel-44050A-SAME70-XPLD_User Guide-12/2015
4
