REB215-XPRO Extension Board [USER GUIDE]
42398A-MCU-03/2015
9
3.
Xplained Pro
Xplained Pro is an evaluation platform that provides the complete Atmel microcontroller experience. The
platform consists of a series of Microcontroller (MCU) boards and extension boards that are integrated with
Atmel Studio, have Atmel Software Framework (ASF) drivers and demo code, support data streaming and
more. Xplained Pro MCU boards support a wide range of Xplained Pro extension boards that are connected
through a set of standardized headers and connectors. Each extension board has an identification (ID) chip
to uniquely identify which boards are mounted on a Xplained Pro MCU board. This information is used to
present relevant user guides, application notes, datasheets, and example code through Atmel Studio. Available
Xplained Pro MCU and extension boards can be purchased in the
1
.
3.1
Hardware Identification System
All Xplained Pro compatible extension boards have an Atmel ATSHA204 CryptoAuthentication™ chip mounted.
This chip contains information that identifies the extension with its name and some extra data. When an
Xplained Pro extension board is connected to an Xplained Pro MCU board the information is read and sent
to Atmel Studio. The Atmel Kits extension, installed with Atmel Studio, will give relevant information, code
examples and links to relevant documents.
Table 3-1, “Xplained Pro ID Chip Content” on page 9
shows the
data fields stored in the ID chip with example content.
Table 3-1. Xplained Pro ID Chip Content
Data Field
Data Type
Example Content
Manufacturer
ASCII string
Atmel’\0’
Product Name
ASCII string
Segment LCD1 Xplained Pro’\0’
Product Revision
ASCII string
02’\0’
Product Serial Number
ASCII string
1774020200000010’\0’
Minimum Voltage [mV]
uint16_t
3000
Maximum Voltage [mV]
uint16_t
3600
Maximum Current [mA]
uint16_t
30
3.2
Standard Headers and Connectors
3.2.1
Xplained Pro Standard Extension Header
All Xplained Pro kits have one or more dual row, 20-pin, 100mil extension headers. Xplained Pro MCU boards
have male headers while Xplained Pro extensions have their female counterparts. Note that all pins are not
always connected. However, all the connected pins follow the defined pin-out described in
Pro Extension Header” on page 9
. The extension headers can be used to connect a wide variety of
Xplained Pro extensions to Xplained Pro MCU boards and to access the pins of the target MCU on Xplained
Pro MCU board directly.
Table 3-2. Xplained Pro Extension Header
Pin Number
Name
Description
1
ID
Communication line to the ID chip on extension board.
2
GND
Ground.
3
ADC(+)
Analog to digital converter, alternatively positive part of
differential ADC.
4
ADC(-)
Analog to digital converter, alternatively negative part of
differential ADC.
5
GPIO1
General purpose I/O.
6
GPIO2
General purpose I/O.
7
PWM(+)
Pulse width modulation, alternatively positive part of
differential PWM.
8
PWM(-)
Pulse width modulation, alternatively positive part of
differential PWM.
1
