Atmel CAMELIA 2.5M User Manual Download Page 12

CAMELIACOL 2.5M user guide

12/12

3.2 ’P

OWER SUPPLY

’’ 

CABLE

 On power supply side :

 SUBD9 male.     Pin out :

Pin
Number

Signal

1

+24V

2

+24V

3

NC

4

NC

5

NC

6

GROUND

7

GROUND

8

NC

9

NC

 note : NC : not connected.

3.3 ‘’RS232’’ 

CABLE

 on computer side :

 SUBD9 female

 pin out compatible with computer serial port

 note : pin out is the same on camera side and on computer side.

Information furnished is believed to be accurate and reliable. However Atmel-Grenoble assumes no responsibility for the consequences of
use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent rights of Atmel-Grenoble. Specifications mentioned in this publication are subject to
change without notice. This publication supersedes and replaces all information previously supplied. Atmel-Grenoble products are not
authorised for use as critical components in life support devices or systems without express written approval from Atmel-Grenoble.

© 2000 Atmel-Grenoble- Printed in France - All rights reserved.

This product is manufactured by Atmel-Grenoble- 38521 SAINT-EGREVE - FRANCE.

For further information please contact :

Atmel-Grenoble - Route Départementale 128 - 91401 ORSAY Cedex - FRANCE -

Phone +33 (0)1 69 33 00 00 -  Fax +33 (0) 1 69 33 03 21.

Internet : http://www.atmel-grenoble.com

Summary of Contents for CAMELIA 2.5M













Reviews: