3
AVR461
2499B–AVR–05/02
Figure 2.
The PC is Connected Directly to the EIT
To set up your PC to connect directly to the Embedded Internet Toolkit, an IP address in
the same range as the Toolkit’s must be assigned to the PC. In Windows
®
environ-
ments, this should be done as follows (some Windows
®
versions might deviate slightly
in appearance):
•
Connect the PC and the Toolkit with the yellow (crossover) Ethernet cable.
•
Open the Windows
®
Control Panel.
•
Select Network.
•
Select TCP/IP -> the PC’s Ethernet adapter from the Configuration tab as shown in
Figure 3.
Figure 3.
TCP/IP Configuration
•
Push the Properties button. A TCP/IP Properties box similar to Figure 4 should
appear.
Yellow Cable
