Atmel AVR ATmegaICE User Manual Download

Page: 23 / 27

AVR

ATmegaICE User Guide

9-1

Section 9

Technical Specifications

System Unit

Physical Dimensions . . . . . . . (H x W x D) 32.4 x 277.1 x 218.6 mm / 1.3 x 10.8 x 8.5 in

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400g / 0.88 lbs

Power Voltage Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 15 VDC

Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 20 W

ICE Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 15 W

Max. Application Power Consumption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 W

Ambient Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 - +70°C (Operating)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55 - +95°C (Non-Operating)

Relative Humidity (Non-condensing) . . . . . . . . . . . . . . . . . . . . . . . . 10 - 90% (Operating)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 95% (Non-Operating)

Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 g, 11ms half sine

Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 g

Connections

Power

Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 mm OD/ 2.1mm ID Center Negative

Host

Serial Connector (RS-232) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-pin D-SUB Female

Serial Communications Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19200 bits/s

Pod

Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . two 2 x 32 Male Header

External Trigger Inputs / Outputs

Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x 7 Male Header

Logic Analyzer Interface

Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . two 2 x 10 Male Headers

Clock specification

Internal Clock:

Minimum frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 kHz

Maximum frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.0 MHz

External Crystal:

Minimum frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32.768 kHz

Maximum frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.0 MHz

Summary of Contents for AVR ATmegaICE




























Search results

Summary of Contents for AVR ATmegaICE

Reviews:

Related manuals for AVR ATmegaICE

Brands by name

Popular brands

Atmel AVR ATmegaICE, User Manual

Search results

Summary of Contents for AVR ATmegaICE

Reviews:

Related manuals for AVR ATmegaICE

Brands by name

Popular brands