ATSAMB11 BluSDK SMART
– Blood Pressure Profile – Getting Started Guide [USER GUIDE]
Atmel-42613A-ATSAMB11-BluSDK-SMART-Blood-Pressure-Profile-Getting-Started-Guide_UserGuide_112015
1
0
10
8. Since the service level connection is now established, the user will see the notifications of the Blood
Pressure measurements as shown.
Figure 7-5.
Console Log for Blood Pressure Measurements
Please Enter the following Pass-code(on other Device):123456
Pairing procedure completed successfully
Notifications enabled by the remote device for interim cuff pressure
Indications enabled by the remote device for blood pressure
Systolic 10 kpa
Diastolic 07 kpa
Map 08 kpa
Pulse rate 60 bpm
Press the button to receive the blood pressure parameters
Started sending Interim Cuff Pressure Values
Cuff pressure 80 mmhg
Cuff pressure 81 mmhg
Cuff pressure 82 mmhg
Cuff pressure 83 mmhg
Cuff pressure 84 mmhg
Cuff pressure 85 mmhg
Cuff pressure 86 mmhg
Cuff pressure 87 mmhg
Cuff pressure 88 mmhg
The Blood Pressure Values are:
Systolic 81 mmhg
Diastolic 61 mmhg
Map 71 mmhg
Pulserate 61 bpm
Press the button to receive the blood pressure parameters
