2.
Creating an Example Application in Atmel Studio
1.
After connecting the board, to create a new project in Atmel Studio go to
File
→
New
and click on
Project
Figure 2-1 Creating New Project in Atmel Studio
on page 11).
Figure 2-1 Creating New Project in Atmel Studio
2.
The New Project wizard will display as shown in
on page 11.
Select the
GCC C executable Project
template, name the project and click
OK
to get the device
selection wizard.
Figure 2-2 New Project Wizard
3.
The Device Selection wizard will display as shown in
Figure 2-3 Device Selection Wizard
on page
11. Select the ATmega328PB device from megaAVR
®
device family and click
OK
.
Figure 2-3 Device Selection Wizard
4.
The new project and the .c file will be created as shown in
12.
Atmel AT08401: Getting Started with Atmel ATmega328PB [APPLICATION NOTE]
Atmel-42482A-Getting-Started-with-ATmega328PB_AT08401_Application Note-08/2015
11
