Hardware Description
2-8
CPLD Development/Programmer Kit User Guide
3300A
–
PLD
–
08/02
Figure 2-3.
Pinout Diagram of 10-pin JTAG Port Header (Top-view)
Figure 2-4.
10-pin Male Header Dimensions
The pinout of this 10-pin JTAG Port Header is compatible with the Altera
®
ByteBlaster
™
and ByteBlasterMV
™
cables. In addition, the ATMISP software allows users to choose
either the Atmel CPLD ISP Cable or the ByteBlaster/ByteBlasterMV cable to implement
ISP.
2.1.6
Power Connectors
The Atmel CPLD Development/Programmer Board contains two different types of power
connectors, and either one can be used to connect to a 9V DC power source to power
the board. The first power connector, labeled JPower, is a barrel power jack with a
2.1 mm diameter post and it mates to a 2.1 mm (inner diameter) x 5.5 mm (outer diame-
ter) female plug. The second power connector, labeled JP Power, is a 4-pin male 0.1"
header with 0.025" square posts. The availability of these two types of power connec-
tors allows the users to choose the type of power supply equipment to use for the CPLD
Development/Programmer Board.
1
3
4
5
8
9
10
6
TCK
GND
TDO
VCC
TMS
NC
NC
NC
TDI
GND
2
7
0.100
0.025 S .
0.235
Top
View
Side
View
0.100
All dimensions are in inches