Atmel AT91SAM9261-EK, User Manual

Page: 35 / 38

AT91SAM9261-EK Evaluation Board User Guide 7-1
6198C–ATARM–15-Dec-06
Section 7
Revision History
7.1 Revision History
Table 7-1.
Document Comments
Change Request
Ref.
6198A First issue.
6198B Removed DataFlash card from list in
Section 1.2 ”Deliverables”
.
Removed references to 32-bit serial DataFlash, ref. AT45DB321C in
Section 1.3 ”The
AT91SAM9261-EK Evaluation Board”
, Figure 2-3 on page 5 “Block Diagram”,
Section
3.3 ”Memory”
, Table 4-1 “Configuration Jumpers and Straps” and in schematic 3/6
“SDRAM and NANDFLASH”.
In Figure 2-3 on page 5 “Block Diagram” changed size of NANDFlash to 2 Gb.
2733
Specified TRACE PORT as NOT POPULATED in Figure 2-3 on page 5 “Block Diagram”.
Changed all instances of DNP to NOT POPULATED in Schematics 2/6 “AT91SAM9261”, 4/6
“Ethernet” and 5/6 “LCD and User Interface”. 2736
6198C New Figure 2-1 “AT91SAM9261-EK Layout - Top View” and new Figure 2-2
“AT91SAM9261-EK Layout - Bottom View
”
3542
Updated
Section 2.6 ”Getting Started”
.
In
Section 2.3 ”Layout”
, updated Figure 2-3, “Block Diagram”.
Added
Section 3.13 ”PIO Usage”
.
In
Section 4.1 ”Configuration Straps”
, updated Table 4-1, S5, with reference to Errata
section.
Updated all schematics in
Section 5.1 ”Schematics”
.
Added Section 6, Errata.