Operating Description
3-14
Firmware Package User Guide
4209A–MP3–12/02
3.5.3
Song Player State
The player can take 5 different states as detailed in Table 3.
Table 3. Song Player States
3.5.4
Song Name
When entering song operating mode or after selecting other memory, the first song or
directory of the root directory is displayed. If the name is more than 14 bytes long, it is
scrolled on the display from right to left. If the root directory is empty (no MP3 file or no
directory) ‘
--
’ is displayed instead of name.
If memory is not formatted, the error state is displayed. Please refer to Section 3.7 to for-
mat the memory.
3.5.5
Playing Time
During song playing, time is displayed as minute:second.
3.5.6
Sound Control
Sound selection is done by pressing the “Sound” key. The level of each selected sound
is displayed on the screen. Sound adjustment is performed by pressing the “Increase” or
“Decrease” key.
3.5.7
Repeat Modes
Two repeat modes are available:
n
Repeat A/B
n
Auto Repeat
These modes are only selectable during song playing mode. Pressing the “Repeat” key
for more than half a second enables or disables the auto repeat feature. Pressing the
“Repeat” key once sets the A marker while pressing the “Repeat” key a second time
sets the B marker. Then song is played from A to B repeatedly.
Repeat modes are signalled to user using a small icon in the first line of the display (see
Figure 3-4) and as detailed in Table 4.
Table 4. Repeat Mode Status
MMC2
MMC card 2 is selected.
Icon
Description
Icon
Description
SONG
MP3 file selected (stop state).
DIRECTORY
Directory selected (stop state)
PLAY
Selected song under playing.
PAUSE
Selected song paused.
ERROR
Selected memory is not formatted.
Icon
Description
Auto Repeat
Endless Playing.
Repeat A/B
A marker is set.
Summary of Contents for AT89C51SND1C
Page 1: ...Firmware Package User Guide ...
Page 2: ......
