
Atmel AT88CK440RED Quick Start Guide
5
8725A–SMEM–09/10
4.
Firmware Upgrade
To upgrade the firmware, click the Help tab and complete steps one through six.
The following steps enable the DFU mode:
1.
Load the Atmel FLIP (FLexible In-System) Programming utility
2.
Click the Firmware upgrade mode Enable button
4.
Click OK in the popup box
5.
Both LEDs will light indicating the board is in DFU mode
6.
Launch FLIP to load the new firmware
Figure 4-1.
Device Firmware Upgrade Mode